Motor Medic | Radiator Flush & Cooling System Cleaner (325ml)

Restore factory-spec thermal management to your vehicle in record time with the advanced Motor Medic 10 Minute Radiator Flush. Engineered by the globally renowned American pioneer Motor Medic and manufactured by Gunk, this heavy-duty cooling system cleaner delivers a fast, professional solution for restoring radiator efficiency. Over miles of driving, internal radiator tubes collect heavy mineral scales, rust oxidation, and oily sludge that restrict fluid movement and trigger dangerous overheating. Motor Medic’s highly concentrated, fast-acting formula chemically breaks down and lifts these performance-robbing deposits in just 10 minutes of idling, ensuring unrestricted coolant flow and stabilizing operational engine temperatures.

Product Specifications:

• Brand: Motor Medic.

• Product Name: 10 Minute Radiator Flush.

• Product Type: Automotive cooling system cleaning flush.

• Volume: 325 ml.

• Origin: Made in USA.

Product Benefits:

• Rapid Action Flush: Advanced chemical engineering cleanses, decontaminates, and flushes the complete cooling architecture in just 10 minutes.

• Dissolves Hard Insulating Layers: Aggressively targets and liquefies stubborn calcium scales, hard water calcifications, internal rust flakes, and grease.

• Optimizes Heat Displacement: Clears narrow radiator cooling paths, maximizing dynamic antifreeze circulation to protect your water pump and thermostat.

• Premium Material Safety: Non-acidic chemical formulation that is thoroughly safe for usage with rubber coolant lines, synthetic plastics, copper alloys, and aluminum cores.

Directions for Correct Application:

1. Allow the vehicle's engine to cool completely, then drain the active old fluid out of the radiator system.

2. Secure the drain valve, pour the entire 325ml bottle of Motor Medic Radiator Flush into the radiator, and top off the system with clean water.

3. Start the engine, set the interior cabin climate heater to maximum hot, and let the vehicle idle for exactly 10 minutes.

4. Turn off the engine, wait for it to cool down to prevent high-pressure burns, and drain the heavily contaminated mixture completely.

5. Flush the system with fresh water until it runs completely clear, then close all relief plugs and refill with fresh premium coolant.

Important Note:

To prevent severe personal injury and boiling water steam burns, never attempt to loosen the radiator cap or unlock drain valves while the system is hot or pressurized. One concentrated 325ml bottle accurately treats standard passenger car cooling systems.

Achieve high-speed radiator cleansing and drive with maximum thermal assurance! Buy the 325ml Motor Medic Radiator Flush today from Carboost store.