Wynn's | Air Intake & Carburettor Cleaner Throttle Valve Purge - 500mL

Wynn's Air Intake & Carburettor Cleaner (500mL) is a heavy-duty, professional aerosol solution formulated with highly active solvent agents to thoroughly purge severe contamination from engine breathing tracts. This fast-acting treatment directly attacks, dissolves, and flushes away sticky gums, hardened varnish, soot, and oily sludge layers that accumulate on throttle valve flaps, linkages, and carburetor internal passages. By re-establishing an unrestricted, calibrated flow of intake air into the combustion zone, it resolves erratic engine behaviors and restores original fuel-air mixing metrics.

Product Specifications:

• Brand: Wynn's

• Product Type: Air Intake System & Throttle Valve Solvents Cleaner

• Volume: 500 mL (500mL)

• Origin: USA

Key Features & Performance:

• Instant Carbon & Varnish Dissolving: Rapidly breaks down complex, baked-on hydrocarbon deposits from butterfly valves without requiring tedious mechanical component teardowns.

• Smooth Idle Countermeasure: Efficiently rectifies unstable engine idling, eliminates sudden stalling tendencies, and stabilizes choppy RPM fluctuations.

• Optimized Throttle Response: Ensures unrestricted, smooth operational clearance for the throttle valve plate, resulting in a snappier, crisp throttle response.

• Combustion Optimization & Lean Emissions: Re-balances the stoichiometric intake air mixture, causing a noticeable drop in fuel wastage and black exhaust smoke.

• Zero-Residue Volatility: Engineered to evaporate fully and clean thoroughly without leaving greasy, wet molecular coatings that could trap loose dust post-cleaning.

Usage Instructions:

• For Carburetor Components: Spray directly onto the linkages, jets, and exterior throats, let the chemicals penetrate for a few moments, then wipe clear with a clean cloth.

• For Throttle Body & Air Intake System:

  1. Detach the main air intake ducting to expose the throttle body valve while the engine is warm but switched off.

  2. Spray a moderate coating directly onto the butterfly valve faces and chamber walls.

  3. Start the engine and rev moderately; spray the fluid in short, controlled bursts into the air intake opening (avoid continuous spraying to prevent engine drowning).

  4. Reconnect the air duct firmly and test-drive the vehicle for several minutes to fully clear out dissolved residues.

Suitability & Applications:

• Highly recommended for all fuel-injected and carbureted gasoline engines; safe for integrated oxygen sensors and catalytic converters when applied according to instructions.

Note:

This formula contains aggressive active cleaning solvents. Avoid spraying directly onto delicate soft rubber components, unsealed decorative interior plastics, or fresh body paints to mitigate material swelling or dulling.

 Restore crisp acceleration performance and cure rough engine idling instantly! Buy the original Wynn's Air Intake & Carburettor Cleaner (500mL) today from CarBoost.