K&N | Power Kleen Cotton Air Filter Cleaner & Degreaser - Large Eco Gallon ( 3.785L)

Restore your performance air filter’s maximum flow dynamics with the genuine K&N Power Kleen Air Filter Cleaner & Degreaser, now available in a bulk 1-gallon commercial size (3.785L). This advanced commercial-grade formulation is uniquely engineered to safely break down and dissolve accumulated road grime, synthetic filter oils, embedded desert sand, and heavy dust from multi-layered cotton gauze media. Designed to offer professional-grade cleaning depth, it thoroughly purges the air induction tracks without deteriorating the natural cotton fibers or the structural epoxy-coated aluminum wire mesh. This heavy-duty 1-gallon bulk size serves as a cost-effective, high-yield maintenance solution for automotive service centers, fleet garages, and tuning enthusiasts looking to keep specialized filtration systems performing at factory baselines.

Product Specifications:

• Brand: K&N.

• Product Type: Cotton Air Filter Cleaning Solution & Heavy-Duty Degreaser.

• Volume / Capacity: 3.785 Liters.

• Chemical Profile: Eco-friendly, biodegradable, non-petroleum based formulation engineered with specialized surfactants.

• Origin: Made in the United States of America.

Product Benefits:

• Deep & Damage-Free Cleansing: Formulated specifically to aggressively target and lift stubborn grime matrixes from organic cotton structures without shrinking or warping the fibers.

• Renews Peak Volumetric Flow: Clears out restrictive surface and deep-seated debris loading, allowing the filter elements to deliver maximum cold air volume to the engine.

• Bulk Maintenance Cost Reduction: The large 1-gallon continuous volume provides enough fluid depth to service filter setups dozens of times, maximizing operational longevity over standard spray bottles.

• Dual-Action Degreasing Potential: Highly effective as a multi-purpose shop degreaser to target and wash away grease buildup on non-rubber engine components and mechanical parts.

Directions for Correct Application:

1. Cleaner Saturation: Apply or spray the K&N Power Kleen cleaner generously onto both faces of the air filter elements until the cotton pleats are thoroughly saturated.

2. Soak Duration: Allow the chemical solution to rest and dissolve the grease deposits for 10–15 minutes. Do not allow the cleaning formula to fully dry out on the media surface.

3. Water Rinse: Rinse the filter element with low-pressure tap water. Always direct the water flow from the clean side (interior) through to the dirty side (exterior) to flush out trapped particles.

4. Natural Evaporation: Gently shake off remaining surface water droplets and let the filter element air dry naturally. Never use forced compressed air or direct heat guns as they distort the cotton.

5. Re-Oiling Phase: Once the filter is 100% dry, it is ready to be properly treated with official K&N filter oil prior to re-installation.

Important Note:

Always limit your maintenance setup to this designated performance cleaner. Utilizing harsh household detergents, commercial dish soaps, or petroleum-based solvents (like gasoline or diesel) to flush the unit will instantly compromise and degrade the organic cotton structures, permanently enlarging the filtration micro-holes, allowing dust passage into the engine, and voiding the filter’s lifetime warranty.

Purge the restriction and bring back raw induction power! Buy the bulk K&N Air Filter Cleaner Gallon from Carboost store today.