Motul | DOT 4 LV Brake Fluid Class 6 500ML

Optimize your vehicle's braking safety and instantaneous hydraulic performance with Motul DOT 4 Low Viscosity Class 6 Brake Fluid. This advanced synthetic fluid is specially engineered to fulfill the precise and demanding requirements of modern automotive braking configurations equipped with complex electronic management architectures.

Owing to its exceptionally low-viscosity parameters, it guarantees ultra-fast fluid circulation through intricate micro-valves, yielding immediate deceleration response and absolute component protection under high-stress operating thresholds.

Product Specifications :

• Brand: Motul

• Product Type: Low Viscosity Class 6 Hydraulic Brake Fluid

• Standard Compliance: DOT 4 LV Grade

• Volume Capacity: 500ML

• Country of Origin: France

Product Benefits :

• Ultra-Fast System Response: The specialized low-viscosity composition facilitates faster and unimpeded fluid translation through tight micro-valves, significantly improving the reaction runtime of electronic safety modules.

• Premium Vapor Lock Resistance: Features a high wet boiling threshold that significantly mitigates dangerous brake fade dynamics induced by moisture absorption over time, preserving a firm pedal feel.

• Comprehensive Infrastructure Shielding: Packed with high-tier anti-oxidation agents and tailored inhibitors to defend internal metallic structures and rubber seals against corrosion, ensuring extended system longevity.

Key Approvals :

Motul DOT 4 Low Viscosity Class 6 Brake Fluid rigorously complies with or exceeds the following major global automotive standards:

• International Organization for Standardization ISO 4255 Class 6.

• US Federal Motor Vehicle Safety Standard FMVSS 116 DOT 4.

• Society of Automotive Engineers SAE J1703 and J1704.

Usage Instructions :

1. Ensure the vehicle is parked on flat ground and let the engine and brake components cool down completely before uncapping the reservoir.

2. Meticulously clean the master cylinder reservoir cap and surrounding areas to stop dirt, dust, or particles from contaminating the hydraulic lines.

3. Slowly pour the fresh Motul DOT 4 LV fluid into the container until it matches the indicated maximum level boundary.

4. Securely fasten the reservoir cap and seal the bottle right after use to prevent the fluid from capturing ambient atmospheric moisture.

Suitable For :

• Highly recommended and specifically designed for modern vehicles integrated with advanced electronic safety nets such as Anti-lock Braking Systems, Electronic Brakeforce Distribution, and Electronic Stability Programs.

• Fully compatible and safe to mix with other conventional, non-silicone-based synthetic fluids holding DOT 3, DOT 4, or DOT 5.1 ratings.

Note :

• Mixing Restraints: Under no circumstances should this product be mixed with silicone-based DOT 5 fluids or mineral-based LHM fluids.

• Drain Interval Guideline: A complete system flush and replacement is recommended every 12 to 24 months in adherence to vehicle manufacturer specifications to ensure structural safety.

• Handling Precautions & Paint Safety: Avoid spilling the fluid onto the car's bodywork as it degrades paint; rinse immediately with water if contact occurs. Wear chemical-resistant gloves and safety goggles during service to avoid severe eye and skin irritation.

Empower your car's smart safety setups and secure instant stopping action when it matters most. Buy Motul DOT 4 LV Brake Fluid 500ML today from Carboost Store!