DVX | Electrical Contact Cleaner Quick Drying Formula - 400mL

Divortex Electrical Contact Cleaner 400mL (#AER1400) is a professional-grade, ultra-pure technical chemical solvent spray developed by the Turkish brand DVX to clean and maintain delicate electrical joints and circuitry. Formulated as an oil-free compound (Yağsız), this highly volatile technical spray penetrates directly into intricate electronics to safely purge layers of dust, light oxidation, moisture, and carbon tracing without causing short circuits. Featuring an instantaneous evaporation metric, the fluid completely vaporizes upon surface contact, leaving absolutely zero chemical film or greasy tracking. This critical zero-residue property ensures that cleaned components do not attract airborne dust or operational grime post-application, thereby preserving signal continuity and structural lifetime.

Product Specifications:

• Brand: DVX by Divortex

• Product Type: Rapid-Evaporating Technical Contact Cleaning Spray (Kontak Temizleme Spreyi)

• Core Technical Profile: Oil-Free Formula / Non-Conductive / Zero Residue

• Volume: 400 mL

• Country of Origin: Turkiye 

Key Features & Performance:

• Instantaneous Fluid Evaporation: Engineered with ultra-high volatility to completely dry within seconds of hitting the surface, speeding up delicate workshop diagnostic and repair tasks.

• True Oil-Free Maintenance (Yağsız): Guarantees a completely dry finish devoid of insulating film or synthetic oils, preventing post-cleaning dust clotting on sensitive electronic switches.

• Restores Peak Signal Conductivity: Dissolves microscopic surface oxidation and salt tracking from pins and leads, eliminating signal degradation and high contact resistance.

• Displaces Destructive Moisture: Aggressively targets and drives out standing humidity or condensation trapped within electrical wiring harnesses to prevent costly short-circuit blowouts.

• Substrate-Neutral Safety Profile: Chemically balanced to protect typical electrical backing boards, wiring insulations, structural plastics, and structural resins from melting or swelling.

Usage Instructions:

• Before executing any chemical spray sequence, isolate the target electronic hardware from its primary power supply line, shut down all switches, and remove battery blocks.

• Shake the Divortex DVX Contact Cleaner can (#AER1400) thoroughly to properly homogenize the pressurized solvent components.

• Aim the actuator nozzle directly toward the rusted or dusty relay block, terminal, or circuit card from a safe distance of 15 to 20 cm.

• Fully depress the valve to flush the surface, letting the liquid run off freely to sweep loose grime, lint, and oxide powders away from core traces.

• Although the specialized chemical solvent features immediate dry-out capabilities, allow the assembly to vent for several minutes to guarantee complete gas displacement before turning the electrical current back on.

Suitability & Applications:

• Universally safe for technical maintenance on Printed Circuit Boards (PCBs), multi-point relays, toggle switches, computer processing components, automotive wiring harnesses, terminal plugs, and mass airflow (MAF) sensors.

Note:

This formula is powered by highly volatile and flammable technical solvents and propellants; never apply this spray onto active electrical fields, hot mechanical substrates, energized connections, or near open ignition flames. Avoid direct application on sensitive non-rated LCD display arrays or specialized glass optics without checking equipment safety parameters, and store the pressurized container clear of direct sunlight.

Shield your complex electronic systems against oxidation welds and drive out moisture with precision Turkish engineering! Buy the authentic Divortex DVX Contact Cleaner (400mL) today from CarBoost.