Fuchs | Titan GT1 Flex 5 SAE 0W-20 Full Synthetic Motor Oil - 1L

Fuchs Titan GT1 Flex 5 SAE 0W-20 is a premium, top-tier German full synthetic motor oil engineered to answer the rigorous technical needs of modern high-efficiency engines. Benefiting from cutting-edge formulation technology, it provides thorough and long-lasting protection for all moving engine internals against wear and thermal degradation. This exceptional lubricant maintains peak engine cleanliness and enhances torque capacity, serving as the prime and secure choice for your vehicle to optimize extended technical operation.

Specifications:

• Brand: FUCHS.

• Product Line: Titan GT1 Flex 5 Full Synthetic.

• SAE Viscosity Grade: 0W-20.

• International Specifications: Licensed under strict European standard ACEA C5/C6, global API SP RC (Resource Conserving), API SN PLUS RC, and certified ILSAC GF-6A specifications.

• OEM Approvals: * Officially approved under factory longlife criteria: BMW Longlife-17 FE+.

  • Formally approved by Mercedes-Benz: MB-Approval 229.71 / 229.72.

  • Certified by Jaguar Land Rover: STJLR.03.5006.

  • Formally approved by Opel: OV0401547 - A20.

  • Approved under Ford specification: WSS-M2C954-A1.

• Volume: 1 Liter container bottle.

• Country of Origin: Germany.

Benefits:

• Extreme Fuel Economy: The advanced light-viscosity profile significantly lowers internal mechanical resistance and structural friction, leading to direct fuel cost savings and decreased exhaust emissions.

• Dynamic Wear Protection: Delivers robust, immediate oil film distribution during cold starts, safely shielding crucial pistons and turbochargers from critical wear.

• Broad Application Recommendations: Heavily recommended for modern vehicle fleets calling for an elite 0W-20 oil, meeting performance levels for Toyota, Nissan, Ford, Jeep, Chrysler, and Fiat platforms.

• Premium Sludge Control: Prevents the accumulation of harmful carbon coatings and lacquer deposits inside combustion chambers, extending drain intervals and protecting engine power output.

Approvals:

• Highly suitable where performance standards for Ford WSS-M2C947-A/B1, Ford WSS-M2C962-A1, Chrysler MS-12145, Fiat 9.55535-GSX/CR1, and VOLVO VCC RBS0-2AE are requested.

How to Use:

1. Securely park your car on level ground, drain the degraded used engine fluid completely, and safely clean the drain plug while the engine block is warm.

2. Fit a fresh premium replacement oil filter, pour the specified volume of Fuchs GT1 0W-20 into the crankcase, and verify accuracy via the mechanical dipstick.

Suitable For:

• Modern passenger vehicles, eco-efficient cars, and hybrid powertrains (Hybrid Ready) requiring a premium 0W-20 viscosity grade coupled with API SP or ACEA C5/C6 international certifications.

Note:

• Always check and consult your original vehicle factory owner's manual to verify correct viscosity selection and performance criteria before installing new fluid.

Treat your engine to supreme German engineering and maximized efficiency! Buy Fuchs Titan GT1 Flex 5 0W20 from Carboost today.