Motul | Brake Fluid DOT 5.1 500ML

Provide your vehicle's intelligent braking setups with ultimate safety and near-instantaneous response times using genuine Motul DOT 5.1 High-Performance French Brake Fluid. This fully synthetic hydraulic fluid is formulated with premium chemical components to easily handle the precise operation required by modern advanced vehicle lines.

Thanks to its highly advanced low-viscosity character, it secures ultra-fast fluid distribution through complex micro-valves, rendering remarkably safe, stable stopping force even under frozen temperature boundaries or severe roadway friction.

Product Specifications :

• Brand: Motul

• Product Type: Low-Viscosity Synthetic Hydraulic Brake Fluid

• Standard Compliance: DOT 5.1 Grade (Non-Silicone Base)

• Volume Capacity: 500ML

• Country of Origin: France

Product Benefits :

• Tailored for Smart Safety Nets: Engineered with a specialized low-viscosity output at cold temperature spectrums, which makes it highly efficient at keeping Anti-lock Braking System (ABS) micro-valves working smoothly.

• Premium Vapor Lock Defense: Possesses high dry and wet boiling point parameters that significantly insulate the system from gas bubble expansion or sudden pedal softening caused by standard moisture uptake over time.

• Lubrication and Full Corrosion Shield: Packed with active anti-oxidation compounds that protect internal metallic pistons and piping lines against oxidation, keeping internal rubber gaskets flexible and leak-free.

Key Approvals :

Motul DOT 5.1 Non-Silicone Brake Fluid strictly complies with or exceeds the following major global automotive standards:

• US Federal Motor Vehicle Safety Standard FMVSS 116 DOT 5.1 (non-silicone), DOT 4, and DOT 3.

• Society of Automotive Engineers SAE J1703 standards.

• International Organization for Standardization ISO 4925 (5.1, 4 & 3).

Usage Instructions :

1. Park the automobile safely on a completely level surface and wait for both the engine and braking components to cool off before servicing the reservoir.

2. Carefully clean the master cylinder reservoir cap and surrounding plastic areas to stop outer dust, sand, or debris from getting inside the hydraulic oil grid.

3. Slowly pour the fresh Motul DOT 5.1 fluid into the reservoir tank until it reaches the indicated maximum fill threshold line.

4. Fasten the reservoir cap firmly and tighten the container immediately after use to safeguard the fluid from capturing ambient humidity.

Suitable For :

• Highly recommended and specifically optimized for modern vehicles integrated with smart automotive safety networks like Anti-lock Braking Systems (ABS) due to its fluid fluidity at cold temperature marks.

• Completely compatible and safe to mix with other conventional, non-silicone glycol-based synthetic fluids holding DOT 3, DOT 4, and DOT 5.1 ratings.

Note :

• Strict Mixing Restriction: Do NOT mix this product with silicone-based fluids (DOT 5 rating) or mineral-based hydraulic oils (LHM fluids) under any circumstances.

• Paint Precaution: Avoid letting the fluid come into contact with vehicle paintwork as it degrades car finishes; if accidental contact occurs, flush immediately with plenty of water without rubbing the spot.

• Safety and Handling: Wear chemical-resistant gloves and protective eyewear during top-ups to prevent skin and eye irritation. Dispose of drained used fluids responsibly at authorized hazardous waste centers.

Empower your car's smart stopping setups and secure total French synthetic safety. Buy Motul Brake Fluid DOT 5.1 500ML today from Carboost Store!