CRC Mass Air Flow Sensor Cleaner 311g is an ultra-pure, high-precision technical chemical solvent engineered and manufactured in the USA by CRC Industries. Explicitly formulated as the first chemical treatment tailored exclusively for highly sensitive automotive Mass Air Flow (MAF) sensors, this compound targets hidden power dropouts effectively. It serves as a specialized, fast-evaporating cleaning countermeasure that thoroughly dissolves layered dirt, grease, oil mists, and fiber fragments drawn through the air filter without harming micro-fine wire elements. Incorporating rapid volatile dynamics (Evaporates in seconds), it provides high-performance enhancement metrics for your vehicle's power plant by eliminating incorrect ECU readings, safely recovering structural throttle responsiveness and original volumetric engine parameters seamlessly.
Product Specifications:
Key Features & Performance Parameters:
-
Safely Cleans & Protects Sensitive Elements: Powerfully strips away structural soot and baked-on oil films from exposed platinum hot-wires or thermistor beads without snapping them.
-
100% Polycarbonate Safe & Zero Leftover Film (Plastic Safe & Leaves No Residue): Engineered with absolute plastic neutrality, ensuring zero warping or chemical bleeding to polymer sensor probes or air intake tubes while drying completely free of tacky coatings.
-
Verifiable Wheel Horsepower Recovery (PROVEN to Gain 4-10 HP): Reclaims lost acceleration parameters and restores factory horsepower metrics by stabilizing correct airflow velocity mapping.
-
Optimizes Volumetric Fuel-Air Integration (Improves Air/Fuel Ratio): Enables the MAF assembly to push perfect air mass data to the powertrain control module, creating clean chemical fuel-burn cycles.
-
Suppresses Excessive Fuel Combustion (Increases MPG): Eliminates rich fuel trim errors caused by insulating dirt crusts on the sensor wires, directly augmenting average miles-per-gallon efficiency.
-
Flashes Off Fast in Seconds (Evaporates in seconds): The pure chemical solvent flashes away instantly upon surface impact, speeding up service turnarounds and blocking humidity tracking.
Application Methodology & Pro-Tips:
-
Ensure the vehicle's ignition is entirely de-energized, the engine is cold, and the MAF wire connector loom is unclipped safely before servicing.
-
Extract the MAF sensor housing from the vehicle intake tract (typically positioned right behind the air filter housing assembly).
-
Hold the detached plastic sensor probe firmly, and shake the CRC No. 05110 canister vigorously to secure proper line pressure.
-
Aim the spray actuator (employing the packaged application extension straw for targeted fluid focus) at the internal wire components from a distance of 10 to 15 cm, applying 10 to 15 short, sweeping blasts to clean all sensing faces.
-
CRITICAL TECHNICAL CAUTION: Never permit physical contact between any tools, cloths, or fingers and the internal hot-wire sensor wires. These elements are fragile and will snap under physical load.
-
Allow the sensor assembly to air-dry completely for a few moments, then carefully bolt back into the intake tube, snapping the electrical harness back into place firmly.
Comprehensive System Adaptability:
-
Formulated as 100% neutral and highly recommended for all technical configurations of modern hot-wire, hot-film, or cold-wire MAF sensor modules deployed across domestic, European, and import cars, sports utility vehicles, and high-performance forced-induction engines.
Note:
This technical formula is highly pressurized and extremely flammable; never spray onto hot engine components or apply while sensors are powered by live current. Keep the aerosol can clear of active mechanical sparks and store in an area under 50°C away from direct solar heat. Avoid skin and eye exposure.
Reclaim up to 10 lost wheel horsepower and tune your air/fuel injection curves perfectly with fast-evaporating, plastic-safe US engineering from CRC! Buy the CRC Mass Air Flow Sensor Cleaner (11 OZ) today from CarBoost.
Free shipping for orders over 399riyal
