Wynn's | Direct Injection Valve Cleaner Powerful Foam Formula - 500mL

Wynn's Direct Injection Valve Cleaner Foam 500mL is a professional-grade, highly advanced chemical maintenance compound engineered in Europe to deep-clean the induction tract and mechanical valvetrain components. Utilizing an active, highly expansive technical foam formula (Powerful Foam Formula), it safely and rapidly liquefies severe carbon crusts, tacky lacquers, and industrial soot baked onto the engine intake manifold, intake valves (uars), valve seats, and the combustion chamber crown. This technical cleaner directly addresses the critical carbon accumulation issues native to modern Direct Injection Engines (such as GDI, FSI, and Common Rail Diesel setups) where fuel does not wash over the intake valves, successfully restoring proper volumetric airflow and reclaiming lost factory engine output.

Product Specifications:

• Brand: Wynn's

• Product Series: Direct Injection Valve Cleaner Edition

• Volume: 500 mL 

• Country of Origin: Belgium.

Key Features & Performance:

• Aggressive Air Intake Carbon Purging: Disintegrates heavy carbon welds inside the intake manifold, maximizing unrestricted oxygen volume delivery directly into the combustion zones.

• Complete Valve & Seat Decarbonization: Strips away structural carbon buildup from intake valve faces, stabilizing compression levels and restoring optimal valve seating seals.

• Piston Crown & Chamber Restoration: Clears combustion residues sitting on the piston crowns, reducing erratic pre-ignition and knocking occurrences.

• Universal Powertrain Versatility: Engineered with absolute compatibility across standard gasoline, gasoline hybrid, diesel, and common-rail diesel hybrid engines.

• Restores Peak Operational Power: Eliminates rough idles, reduces tailpipe emission output, and enhances overall throttle responsiveness by clearing restriction barriers.

Usage Instructions:

• 1. For Diesel & Diesel Hybrid Engines:

  1. Start the vehicle and set the engine speed stationary between 1500 to 1800 RPM.

  2. Position the spray applicator directly into the air intake ducting (downstream of the MAF sensor).

  3. Spray the product in short bursts lasting 1 to 2 seconds, letting the engine stabilize completely between sprays.

  4. After every 10 applications (bursts), allow the engine to return to idle stationary for 3 to 4 minutes.

  5. Repeat steps 3 and 4 sequentially until the contents of the 500mL can are completely consumed.

  6. Following the treatment cycle, execute an internal oil system flush (Engine Flush) and instantly change the motor oil and oil filter.

  7. Perform a road test, making sure not to exceed 2500 RPM for the first 10 minutes of operation.

• 2. For Gasoline & Gasoline Hybrid Engines:

  1. Start the vehicle and stabilize the engine speed between 2500 to 3000 RPM.

  2. Insert the aerosol nozzle directly inside the main air intake tract.

  3. Discharge the spray in extended intervals lasting 4 to 5 seconds, letting the engine acoustics stabilize between doses.

  4. After every 10 applications, shut off the engine completely for 3 to 4 minutes to let the dense foam soak and dissolve the carbon.

  5. Repeat steps 3 and 4 continuously until the canister is entirely empty.

  6. Post-treatment, perform a compulsory engine oil flush, drain the old oil, and install a fresh oil filter and fresh motor oil.

  7. Execute a highway road test, ensuring full utilization of the RPM sweep range to evacuate dislodged carbon particulates through the exhaust.

Suitability & Applications:

• Highly recommended for all modern turbocharged direct-injection architectures (GDI, TGDI, TSI, TFSI, EcoBoost, CRDi) across passenger cars, utility trucks, and hybrid vehicles suffering from restricted air intake pathways.

Note:

 This formula is an induction cleaner designed solely for external air-path applications; never pour this chemical fluid into the vehicle fuel tank or blend it with active engine oil while driving. The specified RPM steps for both gasoline and diesel platforms must be strictly maintained to prevent a catastrophic hydraulic lock inside the engine cylinders, and the engine oil and filter replacement must be performed immediately after servicing.

 Unshackle your engine from suffocating carbon blockages and feel the restoration of pure throttle acceleration! Buy the premium Wynn's Direct Injection Valve Cleaner Foam (500mL) today from CarBoost.