AISIN | Fully Synthetic Brake Fluid DOT 4 500ML

Upgrade your vehicle's braking safety and secure outstanding hydraulic performance with AISIN Fully Synthetic Premium Quality DOT 4 Brake Fluid. This advanced fluid is engineered by AISIN to precisely fulfill the rigorous operational mandates of conventional automotive braking infrastructures and clutch configurations across diverse driving conditions.

Featuring a high-purity fully synthetic formulation, it delivers exceptional thermal stability under continuous heavy pressure, ensuring an instant pedal response and comprehensive component shield against wear or degradation.

Product Specifications :

• Brand: AISIN

• Product Type: Fully Synthetic Hydraulic Brake Fluid

• Standard Compliance: DOT 4 Grade

• Volume Capacity: 500ML

• Country of Origin: South Korea

Product Benefits :

• Premium High-Purity Formulation: Designed with a premium fully synthetic base that maintains optimal operational purity, effectively preventing sludge or thermal deposit formations to ensure consistent hydraulic translation inside the lines.

• Ultimate System Defense: Infused with active inhibitors that insulate internal pistons, metallic lines, and rubber seals from rust and oxidation, avoiding pressure leaks and prolonging overall brake mechanism lifespan.

• Anti-Brake Fade Action: Boasts excellent boiling thresholds that exceed global expectations, lowering the risk of fluid vaporization or gas bubble generation during heavy braking, keeping a firm pedal feel.

Key Approvals :

AISIN Fully Synthetic DOT 4 Brake Fluid strictly complies with or exceeds the following critical global automotive standards:

• US Federal Motor Vehicle Safety Standard FMVSS 116 DOT 4.

• Society of Automotive Engineers SAE J1704.

• International Organization for Standardization ISO 4925 Class 4.

Usage Instructions :

1. Park the vehicle on flat ground and allow the engine and braking infrastructure to cool down completely before handling the reservoir.

2. Thoroughly clean the master cylinder reservoir cap and surrounding areas to stop dirt, dust, or contaminants from getting inside the hydraulic lines.

3. Slowly pour the fresh AISIN fully synthetic fluid into the reservoir until it reaches the indicated maximum level boundary.

4. Securely fasten the reservoir cap and seal the container right away to prevent the fluid from capturing ambient atmospheric moisture.

Expected service life: 100,000 km.

(Recommended replacement interval: Varies depending on the vehicle type and usage conditions; it is recommended to consult the owner’s manual and follow the manufacturer’s approved maintenance schedule.)

Suitable For :

• Highly recommended and fully optimized for conventional automotive hydraulic brake systems, including disc and drum brake units, as well as hydraulic clutch circuits.

Note :

• Storage Guidelines: Keep stored in its original tightly sealed container within a cool, dry area. Brake fluid absorbs air moisture over time; always apply from fresh, sealed bottles to maintain optimal safety parameters.

• Paint Finish Precaution: Never let the fluid touch the vehicle's bodywork as it degrades paint finishes; if contact occurs, rinse immediately with plenty of water without rubbing the surface.

• Safety & Handling: Harmful if swallowed and causes skin and eye irritation. Always wear protective gloves and safety goggles during service, and dispose of drained fluid responsibly at chemical waste stations.

Secure premium synthetic protection and an immediate stopping response for your car. Buy AISIN Fully Synthetic Brake Fluid DOT 4 500ML today from Carboost Store!