BMW | Brake Fluid DOT 4 1000ML

Maintain the supreme hydraulic efficiency and absolute driving safety of your vehicle with the Genuine BMW Group DOT 4 Brake Fluid 1000ML. This premium-tier hydraulic fluid is engineered and tested to satisfy the precise operational parameters of modern BMW architectures, delivering instantaneous and decisive deceleration response under high thermal loads.

Formulated with advanced low-viscosity parameters classified as Class 6, it facilitates ultra-fast fluid transit through the delicate micro-valves of electronic stability networks, ensuring a highly stable pedal feel across changing operational spectrums.

Product Specifications :

• Brand: BMW Group

• Product Type: Genuine Low-Viscosity Hydraulic Brake Fluid

• Standard Compliance: DOT 4 / Class 6

• Volume Capacity: 1000ML (1 Liter)

• Country of Origin: Germany

Product Benefits :

• Premium Anti-Corrosion Defense: Enriched with active chemical compounds that insulate essential metallic structures including steel, cast iron, aluminum, and copper parts within the braking infrastructure, preventing oxidation.

• Optimized for Dynamic Safety Networks: The Low-viscosity character matches the swift flow demands of ABS and electronic stability frameworks perfectly, securing lightning-fast safety modulations.

• High Thermal Endurance: Boasts high boiling point thresholds that safeguard against sudden vapor lock conditions triggered by moisture, preserving stable hydraulic pressure during intensive usage.

Key Approvals :

Genuine BMW DOT 4 Class 6 Brake Fluid rigorously meets or exceeds the following international automotive criteria:

• Society of Automotive Engineers standards SAE J1703 and SAE J1704.

• US Federal Motor Vehicle Safety Standard FMVSS 116 DOT 3 and DOT 4 ratings.

• International Organization for Standardization ISO 4925 Class 6 standards.

Usage Instructions :

1. Park the automobile on flat ground and let the engine compartment and braking hardware cool off completely before uncapping the main tank.

2. Meticulously clean the master cylinder reservoir cap and surrounding plastic areas to avoid dropping outer dust or contaminants inside the hydraulic circuit.

3. Carefully pour the fresh genuine BMW fluid into the container until it correctly lines up with the marked maximum (MAX) boundary.

4. Securely fasten the reservoir cap right after completion and keep the bottle sealed to insulate any remaining fluid from air moisture.

Suitable For :

• Heavily recommended and tailored for most modern BMW models built from the production year 2004 onwards.

• Backward compatible and safe to mix with conventional DOT 3 or DOT 4 fluids, though maximum operational longevity and performance parameters are achieved when used pure.

Note :

• Mixing Limitations: Under no circumstances should this product be combined with silicone-based (DOT 5) or mineral oil-based hydraulic fluids to preserve system safety.

• Hygroscopic Nature & Storage: The fluid naturally absorbs ambient atmospheric humidity over time, which gradually lowers its boiling point. Always store in its original tightly sealed bottle within a cool, dry area.

• Bodywork Finish Precaution: Avoid splashing the fluid onto the vehicle's painted surfaces as it strips car paint; rinse instantly with rich amounts of water if contact occurs. Wear safety goggles and gloves during top-ups.

Provide your BMW with top-tier German engineering and premium deceleration safety. Buy Genuine BMW Brake Fluid DOT 4 1000ML today from Carboost Store!